Medmix.Header.SkipLinkLabel

Unlawful Copies of Dispensers – medmix Switzerland successfully defends its rights against counterfeiters

3 November 2022
Baar

medmix Switzerland Ltd is the global market leader in the design and production of manual, pneumatic and battery handheld sealant and adhesive applicators. In recent years nearly identical copies of such dispensers have been discovered on the market. These slavish imitations from other producers are not made under the strict quality control measures of medmix and therefore are not protected by its guarantee.

In the interest of protecting its customers against erratic and poor performance without guarantee, medmix will continue to take legal action against such unlawful copies.

MK™ dispensers, originally produced and supplied by Krøger A/S since 1922, continue into the future as part of the medmix Switzerland portfolio. The renowned MK dispensers are available through medmix Switzerland Ltd. and its affiliates, while medmix Switzerland Ltd has entrusted medmix UK Ltd. with the manufacture of the dispensers.

Krøger A/S was acquired by medmix in 2013. The product range, which includes Manual, Battery and Pneumatic driven dispensers for any application (cartridges, sachets or bulk pack), was originally manufactured at the company’s factory in Denmark. In 2017, manufacturing of the dispensers was relocated to medmix UK Ltd in Hungerford, UK.

There is a more than 15-year history of successfully stopping unlawful copies of MK dispensers in Germany and Scandinavian countries. The Cologne Regional Court (Landgericht Köln) decided already in 2006 that copies of the renowned MK H14 dispenser by Kent Bridge Enterprise Co. of Taiwan (“Kent Bridge”) were unlawful and created an avoidable deception concerning the origin of these dispensers, and the court issued a preliminary injunction (“einstweilige Verfügung”) forbidding their further distribution by Kent Bridge. Likewise, the distribution of unlawful copies of the MK H12, MK H13, and MK H14 dispensers was successfully stopped in numerous subsequent instances.

Subsequently, medmix successfully enforced its rights under unfair competition law against further nearly identical MK H 14 variations from Kent Bridge, and the Higher Regional Court of Düsseldorf (OLG Düsseldorf) and German Federal Court (BGH) confirmed that the MK H14 trade dress is original, and that Kent Bridge must cease and desist from selling their MK H14 variants in all colors with their decisions from 2016 to 2020. 

Earlier this year, medmix became aware of an international wholesaler and retailer of hardware, such as fasteners and tools, selling the original MK H14 in red as well as a variation thereof manufactured and distributed by Vicli Products, Inc. of Taiwan, which is a successor firm of the now defunct Kent Bridge enterprise, owned by the son of the earlier owner of Kent Bridge. Because of our strong legal position due to the earlier court decisions on such H14 variants, the international hardware firm has agreed to stop selling this H14 variant in an out-of-court settlement. 

In September of this year, two exhibitors at the International Hardware Fair 2022 in Cologne, Germany (Internationale Eisenwarenmesse Köln), Mingxing Tools of Jinhua, China and Seagull Tools of Taipei, Taiwan were found to be offering copies of the MK H14 dispenser on their websites. Seagull was served with a cease & desist letter, and therefore did not exhibit any H14 copies at the show. However, Mingxin Tools, a dispenser manufacturer, refused to sign a cease & desist declaration concerning its manufacture, sales and distribution of copies of the H14 in Germany. For this reason, medmix filed and obtained a preliminary injunction against Yongkang Mingxin Tools Factory (“Mingxin”), BY217 Province Way Sili Town, 321300 Jinhua, China from the Cologne Regional Court (Landgericht Köln), on 27 September 2022. This decision (31 O 191/22) forbids Mingxin from offering and distributing three nearly identical copies of the H14. As a result, Mingxin agreed in a settlement to cease and desist under contractual penalty from offering and/or selling and/or advertising the H14 copies worldwide.

medmix strongly recommends their customers to watch out for fake imitations and to look for the unique MK trade dress of their dispensers (image below for a MK H14 RS dispenser) with the MK trademark fixed on the dispenser providing the assurance of a medmix high quality standard guarantee.

dispenser

Medmix, through its brands MIXPAC™, is the leading system provider in the area of mixing, dosing and applying, COX™ provides a wide range of professional, practical dispensers, and MK™ is the specialist in customized high-quality dispensing solutions.

mixpac-mk-cox-tm


About medmix

medmix is a global leader in high-precision delivery devices. We occupy leading positions in the healthcare, consumer and industrial end-markets. Our customers benefit from a dedication to innovation and technological advancement that has resulted in over 900 active patents. Our 13 production sites worldwide together with our highly motivated and experienced team of nearly 2’000 employees provide our customers with uncompromising quality, proximity and agility. medmix is headquartered in Baar, Switzerland. Our shares are traded on the SIX Swiss Exchange (SIX: MEDX). www.medmix.swiss

Inquiries:

Media Relations: Peter Trampert, Senior Communications Manager

communications@medmix.com

Investor Relations: Sheel Gill, Head of Investor Relations
investorrelations@medmix.com

This document may contain forward-looking statements including, but not limited to, projections of financial developments, market activity, or future performance of products and solutions containing risks and uncertainties. These forward-looking statements are subject to change based on known or unknown risks and various other factors that could cause actual results or performance to differ materially from the statements made herein.